Not used for this product
e offer a choice of shipping methods Click on "My Cart" icon to get the cost of each service
Australia Post (Economical & ideal for smaller less urgent items)
StarTrack Courier (Efficient & ideal for larger & more urgent items)
Australia Post Express (Speedy & ideal for smaller urgent items)
Local Melbourne Metro Courier (Only available in the Melbourne metro
Bonus Free shipping is available on orders shipped to Melbourne Metro areas during promotional periods.
Warranty Table of Contents
It is important to remember that a “Warranty against Defects” is provided in addition to consumer guarantees and does not limit or replace them.
As of January 1st 2012, manufacturers/suppliers that choose to provide a “Warranty against Defects” to consumers must provide a document evidencing that the warranty complies with specific Australian Consumer Law requirements. The ACL is administered and enforced jointly by the ACCC, State and Territory consumer protection agencies) and where relevant, ASIC (the ACL Regulators).
We are aware of the reforms and have amended our “Warranty against Defects” statement as a result of changes to the Competition & Consumer Act (CCA). In particular, most changes result from the Australian Consumer Law (ACL) sections of the CCA.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Software Duplication Services Pty Ltd (ABN 47 060 250 179) (“SDS”) provides the following warranty in relation to its goods (“Product”). The benefits of this warranty are in addition to any rights and remedies imposed by Australian State & Federal legislation that cannot be excluded. Nothing in this warranty is to be interpreted as excluding, restricting or modifying any State or Federal legislation applicable to the supply of goods and services which cannot be excluded, restricted or modified.
SDS warrants that, subject to the exclusions and limitations below, the Product will be free from defects in materials and workmanship for the period specified on the product packaging and/or the website from date of purchase.
If a defect appears in the Product before the end of the warranty period and SDS finds the Product to be defective in materials and workmanship, SDS will at its own discretion repair or replace the Product free of charge.
If goods presented for repair are capable of retaining user-generated data, repair of these goods may result in loss of the data.
Proof of purchase shall be required to be eligible for this warranty and to establish the commencement date of this warranty. This warranty is valid for the original purchase only and is not transferrable to a subsequent customer if the Product is sold by the original customer during the warranty period.
The term of your warranty period shall commence from the purchase date appearing on your purchase receipt from an authorised distributor, reseller or retailer and extends only for the time set forth in the Product documentation. This information can be obtained from the packaging and/or the SDS website.
No product may be returned to SDS without first contacting us for a RMA (Returned Merchandise Authorisation) number. If it is determined that a Product may be defective, you will be given an authorisation number and instructions for Product return. An unauthorised return, i.e. one for which an RMA number has not been issued, will be returned to you at your expense. Authorised returns are to be shipped prepaid and insured to our Head Office in qualified packaging.
SDS will not accept goods for repair unless we have provided the consumer with a Notice to Customer Relating to Repair of Goods that complies with regulations. As the notice relates to the repair of Goods that store user-generated data, the repairer’s Notice states that the repair of Goods may result in loss of data. Since it is also our practice to supply refurbished Goods as an alternative to repairing a consumer’s defective Goods, our notice specifies that the Goods presented for repair may be replaced by refurbished Goods of the same type rather than being repaired. The Repairer’s Notice will be issued at the same time that we issue an RMA number. This statement is also available on the Verbatim Australia website.
The warranty will not apply where:
The warranty does not extend to:
Verbatim makes no express warranties or representations other than set out in this warranty. The replacement of the Product or part of the Product is the absolute limit of Verbatim’s liability under this express warranty.
Goods or Product presented for repair may be replaced with refurbished goods or Product of the same type rather than being repaired. Refurbished parts may be used to repair the goods or Product.
If the goods or Product presented for repair are capable of retaining user-generated data, repair of the goods or Product may result in a loss of data.
“User-Generated data” includes but is not limited to:
Software Duplication Services Pty Ltd
PO Box 203 Pascoe Vale Sth, Victoria 3044
Australia
Tel: +61 0 408 586 405
Tel: +61 3 383 1655
Email: sales@softdup.com.au
Website: www.softdup.com.au
Pretec 256kb SRAM Memory Card with 8kb Attribute 16-Bit ControlerBuy from Pretec Authorised Australian Distributer Qty discounts available |
PCMCIA type I/II SRAM PC card is designed with dual backup batteries design and dual rechargeable battery design(130mAh) for data retention. Pretec SRAM PC card is compatible with all known PCMCIA SRAM PC card applications. Packaged in PCMCIA Type I housing, Pretec SRAM PC card is available from 256KB to 16MB and supports an extended range of industrial operating temperatures (-40°C to +85°C). *The removable (replaceable) but non-rechargeable 3V lithium battery as the primary battery and an on-board rechargeable but non-replaceable battery as the secondary battery. Such design allows the replacement of primary battery without data loss adding to the digital signals which alert users of the need of primary battery replacement.
The write protect switch on the SRAM card provides a useful measure of protection from inadvertently over-writing stored data.
**The dual rechargeable battery can provide much more battery life time in order to preserve user data. For more security, the write-protect switch on the SRAM PC card provides protection from inadvertent data erasure.
***Optional wide temperature is only for metal frame version.
Capacity : 2MB
Battery : Rechargeable/ Replaceable battery
Capacity: | 256KB |
Temp Range: | Industrial Grade:-40°C~+85°C |
Key feature: | Dual backup batteries design |
Pack Weight | 0.5 kg |
Dimensions: | 85.6mm(L) x 54mm(W) x 3.3/5mm(H) |
Key Features | Pretec SRAM cards features high speed, reprogrammable, non-volatile solid state memory technology with low power consumption for maximum battery life and reliable data retention in a wide range of mobile and embedded applications. |
Product Identifiers |
S65256-E-16 SRAM Card(8KB A/M)(Industrial Grade:-40°C~+85°C) |
Spec Sheet |
Product Spec sheet Available Access time: 120ns Optional atribute memory: 8KB E2PROM Read voltage: 5V Write/Erase voltage: 3.3/5V Block structure: 128K or 256K Write/Erase cycle per block: 100,000 |
SRAM's use with ther following equipment:
Advantest Spectrum Analyzers: R3463, R3465, U3641, U3641N, U3661, U4342, U4941, etc. (up to 2MB) Intelligent Instrumentation LANpoint Barcode Data Collector & other Data Collection Terminals
Ag Leader Yield Monitoring Systems / Yield Monitors (without attribute memory)
Intermec Janus 2010, 2020, 2050 Handheld Computers (Portable Data Collector)
Alesis Synthesizers (Keyboards): Andromeda A6, QuadraSynth Plus, S4, S4 Plus and QS Series; Drum Module: DM Pro Korg Synthesizer/Keyboard: Wavestation SR; 01/W or 01/Wfd Music Workstation
Amstrad NC100 Notepad, NC200 Notebook Laser Atlanta Rangefinder, Mapper, Laser System
Apple E-mate 300, Newton 100, 120, 130, MessagePad (with attribute memory)
Leica Geosystems Survey Instruments: Geosystem T1800/ TC1800/ TCA1800/ TCR & TCRA 1800 series, Total Stations TPS1100 series: TC1100/ TCA1100/ TCR 1100/ TCRA 1100 series (1101, 1102, 1103, & 1105), etc.
Anritsu MS2702A Spectrum Analyzer Micro-Trak Yield Monitoring Systems / Yield Monitors (without attribute memory)
PE Applied Biosystems GeneAmp PCR System 9700 Midas XL4 Audio Mixing Consoles / Analog Mixer
BSS FDS-388 Omnidrive Sound Management System Motorola PDA: Envoy 150 (up to 2MB), Marco (up to 2MB)
Campbell Scientific CR5000, CR9000 Data Loggers Nikon-Trimble DTM-700 series (DTM-720, DTM-730, DTM-750) Total Station Survey Equipment, DTM-801 Series Field Stations
Case IH Advanced Farming Systems (AFS) Yield Monitors (without attribute memory) Pfaff Sewing Machines
Casio Z-7000 Zoomer (PDA) Rockwell Automation Entek IRD DataPac 1250 (DP1250) & DataPac 1250 (DP1500) Data Collectors (Vibration Analyzers).
Chroma Video Generator 2329 Roland Audio Recorder AR-3000
Clavia Nord Lead Synthesizers (Keyboards)
Satloc Yield Monitoring Systems / Yield Monitors (without attribute memory)
Compaq Hs-D40, J40, J50, Z50 Sharp Mobilon HC-4000, 4100, 4500, PDA 3100, Norand, Zaurus ZR5000, 5700, 5800 (up to 2MB, with attribute memory)
dataTaker DT600, DT605 Data Loggers
Sony Magic Link (with attribute memory)
Dipstick 2000 Floor Profiler
Sumitomo SH100A 100 ton Injection Molding Machines
Dranetz Power Platform PP4300 TC Electronic M2000 Studio Effects Processor (up to 2MB), M3000 Studio Reverb Processor (up to 2MB), Reverb 4000 (up to 2MB), Reverb 6000 (up to 2MB)
Emerson Machinery Health Analyzer CSI 2120, RS3 MPC5 Teklynx PrintPad 2000
Emulator Ultra Proteus Synthesizer (keyboards) Telxon PTC 1140
Ensoniq KT, MR series Synthesizers (keyboards) Topcon Data Collectors: FS & GTS series
Entek IRD DataPac 1250 (DP1250) & DataPac 1250 (DP1500) Data Collectors (Vibration Analyzers). Toyo Injection Molding Machines
FATO CL408 Printer Trimble GPS Plotter NT200D
Fluke Hydra 2635A Data Acquisition Unit Two Technologies PCL-50 Handheld Computer
GE Fanuc Computer Numeric Controls (CNC) series 15-B, 16-B, 16-C, 16i-A, 18-B, 18-C, 18i-A, 20-A, 21-B, 21i-A; PowerMate H (PM-H), PM-1, Motion Mate MCS700, etc. Uson Leak, Flow and Function Test System 1100
HP 95LX/100LX/200LX, 1000CX, OmniGo 100/ 120/ 700LX PDAs & Palmtops Van Dorn Demag Demag xxxx ton - Pathfinder 5000
HP/Agilent 8920A, 8920B Communications Test Sets, E6380A (HP 8935) CDMA Base Station Test Set Videx OmniWand Data Collection Terminal