Not used for this product
e offer a choice of shipping methods Click on "My Cart" icon to get the cost of each service
Australia Post (Economical & ideal for smaller less urgent items)
StarTrack Courier (Efficient & ideal for larger & more urgent items)
Australia Post Express (Speedy & ideal for smaller urgent items)
Local Melbourne Metro Courier (Only available in the Melbourne metro
Bonus Free shipping is available on orders shipped to Melbourne Metro areas during promotional periods.
Warranty Table of Contents
It is important to remember that a “Warranty against Defects” is provided in addition to consumer guarantees and does not limit or replace them.
As of January 1st 2012, manufacturers/suppliers that choose to provide a “Warranty against Defects” to consumers must provide a document evidencing that the warranty complies with specific Australian Consumer Law requirements. The ACL is administered and enforced jointly by the ACCC, State and Territory consumer protection agencies) and where relevant, ASIC (the ACL Regulators).
We are aware of the reforms and have amended our “Warranty against Defects” statement as a result of changes to the Competition & Consumer Act (CCA). In particular, most changes result from the Australian Consumer Law (ACL) sections of the CCA.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Software Duplication Services Pty Ltd (ABN 47 060 250 179) (“SDS”) provides the following warranty in relation to its goods (“Product”). The benefits of this warranty are in addition to any rights and remedies imposed by Australian State & Federal legislation that cannot be excluded. Nothing in this warranty is to be interpreted as excluding, restricting or modifying any State or Federal legislation applicable to the supply of goods and services which cannot be excluded, restricted or modified.
SDS warrants that, subject to the exclusions and limitations below, the Product will be free from defects in materials and workmanship for the period specified on the product packaging and/or the website from date of purchase.
If a defect appears in the Product before the end of the warranty period and SDS finds the Product to be defective in materials and workmanship, SDS will at its own discretion repair or replace the Product free of charge.
If goods presented for repair are capable of retaining user-generated data, repair of these goods may result in loss of the data.
Proof of purchase shall be required to be eligible for this warranty and to establish the commencement date of this warranty. This warranty is valid for the original purchase only and is not transferrable to a subsequent customer if the Product is sold by the original customer during the warranty period.
The term of your warranty period shall commence from the purchase date appearing on your purchase receipt from an authorised distributor, reseller or retailer and extends only for the time set forth in the Product documentation. This information can be obtained from the packaging and/or the SDS website.
No product may be returned to SDS without first contacting us for a RMA (Returned Merchandise Authorisation) number. If it is determined that a Product may be defective, you will be given an authorisation number and instructions for Product return. An unauthorised return, i.e. one for which an RMA number has not been issued, will be returned to you at your expense. Authorised returns are to be shipped prepaid and insured to our Head Office in qualified packaging.
SDS will not accept goods for repair unless we have provided the consumer with a Notice to Customer Relating to Repair of Goods that complies with regulations. As the notice relates to the repair of Goods that store user-generated data, the repairer’s Notice states that the repair of Goods may result in loss of data. Since it is also our practice to supply refurbished Goods as an alternative to repairing a consumer’s defective Goods, our notice specifies that the Goods presented for repair may be replaced by refurbished Goods of the same type rather than being repaired. The Repairer’s Notice will be issued at the same time that we issue an RMA number. This statement is also available on the Verbatim Australia website.
The warranty will not apply where:
The warranty does not extend to:
Verbatim makes no express warranties or representations other than set out in this warranty. The replacement of the Product or part of the Product is the absolute limit of Verbatim’s liability under this express warranty.
Goods or Product presented for repair may be replaced with refurbished goods or Product of the same type rather than being repaired. Refurbished parts may be used to repair the goods or Product.
If the goods or Product presented for repair are capable of retaining user-generated data, repair of the goods or Product may result in a loss of data.
“User-Generated data” includes but is not limited to:
Software Duplication Services Pty Ltd
PO Box 203 Pascoe Vale Sth, Victoria 3044
Australia
Tel: +61 0 408 586 405
Tel: +61 3 383 1655
Email: sales@softdup.com.au
Website: www.softdup.com.au
Bravo SE-3 is an "all-in-one" disc publishing system and DVD duplicator. It combines fast, automated robotic CD/DVD or Blu-ray Disc™ duplicationalong with full-color, 4800 dpi direct-to-disc printing - all in one compact, desktop unit. Bravo SE-3 is ideal for producing jobs of up to 20 discs at-a-time. Hands-Free Burning and Printing of CDs / DVDs / BDsThe Bravo® SE-3 Disc Publisher from Primera is a compact, all-in-one automated disc production factory that fits right on your desktop.It produces full-color, high-quality discs that make your business or organization look truly professional. Features Include:
|
|
Bravo SE-3 takes the complex task of burning and printing discs and makes it simple. It uses Primera’s sixth-generation robotics, ensuring reliable and efficient operation.
Here’s how the process works:
1. Bravo SE-3 ’s robot arm picks a blank disc from the input bin.
2. The disc is placed into the integrated recorder.
3. The disc is burned.
4. The robot moves the disc to the built-in, 4800 dpi direct-to-disc inkjet color printer.
5. The disc is printed.
6. The robot picks the disc from the printer, places it into the output bin and starts over again.
Bravo SE-3 does all of the work for you – unattended and automatically. It saves you time and money on every disc you produce!
Bravo SE-3 is perfect for a wide variety of light- to medium-duty disc publishing jobs. You can burn and print individual discs with unique data or quantities of the same disc. Just a few of the most popular applications include video and music content, software, trade show handouts, instruction and training manuals, technical documentation, PowerPoint® presentations, catalogs – and more.
From initial set-up to full operation, Bravo SE-3 is easy to use. PTPublisher professional burning software is included for Windows® and Mac users. Both burning software packages allow virtually any digital information to be duplicated. Disc design software is also included. You’ll be automatically burning and printing discs in minutes.
You can use virtually any printable-surface DVD±R or CD-R media. For ultimate performance, try TuffCoat Extreme™ Media surface (glossy finish). Both are highly water-resistant and produce the most professional-looking discs you’ve ever seen!
If you only need to print, the Bravo SE-3 AutoPrinter produces gorgeous, full-color discs in jobs of up to 20 discs at a time. It’s the perfect, low-cost automated printing solution for the tower-style duplicator that you may already own.
Primera offers professional-grade disc publishing systems for Blu-ray Disc Media with its Bravo SE-3 Blu Disc Publisher. Ideal for developers of game software as well as high-definition video production, the Bravo SE-3 Blu works automatically and "hands-free."
Using precision computer-controlled robotics, discs are transported into the integrated Pioneer® CD-R, DVD±R, BD-R SL & DL recordable drive. Then, each disc is individually printed in brilliant, high-resolution color at up to 4800 dpi.